Insulation Company in Burbank, CA
Blown in insulation solves a problem Burbank homeowners know well: rooms that cook in August and attic spaces that radiate heat into living areas long after sunset. East Los Angeles Insulation Co has served Burbank since 2018, and most of our work here involves dense-pack cellulose or loose-fill fiberglass in 1920s – 1950s bungalows that were built with zero insulation in the walls and minimal coverage above the ceiling. We stock GreenFiber and Owens Corning products, which gives us flexibility when a Magnolia Park ranch needs sound control as much as thermal performance. Call (866) 566-0304 and we’ll tell you exactly what your attic or wall cavities need.
Why Burbank Homes Are Different
Burbank sits in the eastern San Fernando Valley, where summer afternoons routinely pass 100°F and the sun beats on composition roofs for ten-plus hours a day. That means the primary job of insulation in Burbank is blocking heat gain from above, not trapping warmth inside. Radiant barrier and high-R blown insulation in the attic deliver the fastest payback on cooling bills. Homes in the Rancho and Magnolia Park districts were largely built between the 1920s and 1950s, and many still have their original wall cavities, often with knob-and-tube-era framing and no insulation whatsoever. Single-pane windows let heat pour in, and old plaster walls have no thermal break. On top of that, Burbank is a studio town. Thousands of homes sit under the approach and departure paths of Hollywood Burbank Airport and within earshot of Warner Bros., Disney, and NBCUniversal production lots. Homeowners here routinely ask about sound-rated assemblies, not just R-value. A thermal-only contractor quoting standard fiberglass batts misses half the job. We quote dense-pack cellulose for wall cavities specifically because it hits both thermal and acoustic targets without tearing out original plaster. That dual-purpose approach is how insulation gets done right in Burbank.
Our Main Burbank Services
Homeowners in Burbank call us most about two things: reclaiming attic space and air-sealing older homes against Valley heat and aircraft noise. Here’s what each involves.
Attic Insulation in Burbank
Most Burbank bungalows and ranches have undersized attic insulation, often a thin layer of old fiberglass that’s settled, matted, and doing very little. We inspect the attic floor, check for gaps around can lights and chase ways, and recommend either blown-in fiberglass over the existing layer or a full removal and re-insulation where rodent activity or decades of dust have compromised the material. Because Burbank summers punish a poorly insulated attic, we often spec a higher R-value than a coastal contractor would. See Attic Insulation in Burbank for specific pricing and approaches.
Spray Foam Insulation in Burbank
Older Burbank homes with uninsulated exterior walls or vented attics that double as storage often benefit from spray foam. Closed-cell foam in particular adds structural rigidity and blocks air movement, which matters in 1920s wall cavities that are shallow and irregular. It also cuts noise transmission, a real advantage near the airport and studio lots. We install open-cell and closed-cell foam using Demilec products and match density to the application, whether it’s a knee wall, a rim joist, or a full attic encapsulation. See Spray Foam Insulation in Burbank for details.
Blown In Insulation in Burbank
Blown in insulation is the workhorse retrofit for Burbank’s older housing stock. In a 1930s Rancho bungalow with uninsulated wall cavities, dense-pack cellulose can be blown through small access holes without disturbing original plaster, adding both R-value and real sound attenuation against airport and studio noise. The material we most often recommend is Blown In Insulation using GreenFiber cellulose or Owens Corning fiberglass depending on the cavity size, moisture conditions, and whether the homeowner wants recycled content. Here’s how the sub-jobs break down.
Cellulose Insulation
Signs you need it
Your home was built before 1980, interior walls feel warm to the touch in summer, and outside noise carries into bedrooms more than you’d expect from the street distance.
What it costs in Burbank
In Burbank, dense-pack cellulose into existing wall cavities runs $2.20 – $4.00 per square foot, and loose-fill attic cellulose typically lands between $1.20 and $2.60 per square foot installed.
How we do it
We drill small access holes through the interior or exterior wall surface at each stud bay, blow cellulose to a consistent density, then patch and touch up the holes so the wall looks untouched.
Blown In Attic Insulation
Signs you need it
Upstairs rooms feel noticeably hotter than the rest of the house by mid-afternoon, or your current attic insulation sits below the top of the ceiling joists.
What it costs in Burbank
Attic-only blown insulation in Burbank spans $1.20 – $2.60 per square foot for fiberglass loose-fill, and $1.45 – $2.80 per square foot for cellulose, depending on depth and access.
How we do it
We air-seal bypasses around lights, wires, and plumbing penetrations, blow the material to the specified R-value, and include baffles at the eaves so soffit vents keep breathing.
Blown In Fiberglass Insulation
Signs you need it
Your attic has batts that are compressed, shifted, or stained, and you want a uniform, fluffy layer that resists settling and leaves no gaps.
What it costs in Burbank
Blown fiberglass insulation in Burbank typically costs $1.20 – $2.60 per square foot installed for open attic floors, with wall cavity applications running higher per square foot due to the density required.
How we do it
We run a blowing machine from the truck, feed Owens Corning loose-fill fiberglass through a hose to the attic or wall cavity, and monitor bag count against square footage to verify the R-value we quoted.
Loose Fill Insulation
Signs you need it
You have an irregular attic floor, lots of joists, ducts, and cross-bracing, and batts would leave gaps you can’t safely walk around to install.
What it costs in Burbank
Loose fill insulation in Burbank ranges from $1.20 – $2.80 per square foot depending on material and depth, with cooler attics in the Rancho district often warranting deeper fills.
How we do it
We prep the attic by marking target depth lines on trusses or rafters, blow loose-fill in overlapping passes, and hand-rake the surface for uniformity before wrapping up.
What Blown In Insulation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Cellulose wall cavities (dense-pack) | $2.20 – $4.00 per sq ft |
| Loose-fill attic (fiberglass) | $1.20 – $2.60 per sq ft |
| Loose-fill attic (cellulose) | $1.45 – $2.80 per sq ft |
Is blown in insulation worth it in Burbank’s climate?
Yes. Blown in insulation blocks radiant heat from the roof deck from reaching your living space, which directly reduces air-conditioning runtime during Burbank’s 100°F summer stretches. Our free estimate at (866) 566-0304 will show projected payback based on your home.
Can you blow insulation into walls without removing plaster?
Yes. Dense-pack cellulose can be blown into existing wall cavities through small access holes without tearing out original plaster, which matters a lot in Burbank’s 1920s – 1950s bungalows. Call (866) 566-0304 to have us assess your walls.
Brands We Service in Burbank
We carry and install Owens Corning, Johns Manville, GreenFiber, and Demilec products, and we keep common loose-fill and dense-pack materials stocked for same-week Burbank jobs. Every home gets a recommendation based on what performs, not what happens to be on the truck. Learn more about our brands and why we carry each one.
Pricing for Insulation Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Attic blown fiberglass | $1.20 – $2.60 per sq ft |
| Attic blown cellulose | $1.45 – $2.80 per sq ft |
| Dense-pack cellulose walls | $2.20 – $4.00 per sq ft |
| Spray foam ceiling / roof deck (open-cell) | $1.20 – $3.20 per board ft |
| Spray foam walls (open-cell) | $1.50 – $3.60 per board ft |
| Spray foam ceiling / roof deck (closed-cell) | $2.20 – $4.40 per board ft |
| Spray foam walls (closed-cell) | $2.20 – $5.00 per board ft |
| Spray foam floors (open-cell) | $1.40 – $2.80 per board ft |
| Spray foam floors (closed-cell) | $2.20 – $4.60 per board ft |
| Attic batt insulation | $1.80 – $3.20 per sq ft |
| Wall batt insulation | $1.50 – $3.50 per sq ft |
Prices in Burbank run higher than the Valley average when we’re working in cramped 1920s attics with low headroom, or when the job requires acoustic detailing near the airport and studio zones. Every quote is line-itemed and upfront, so you know the full number before we start.
Neighborhoods We Serve in Burbank
We work across Burbank’s residential districts, from the tree-lined streets of Magnolia Park to the hillside pockets above the Rancho and the newer condo and townhome clusters near downtown and the Media District. Most estimates happen within two business days, and we schedule installs around your availability, not ours.
- Magnolia Park
- Rancho Adjacent
- Media District
- Northwest Burbank
- Verdugo Hills foothills
Service Area – Cities Near Burbank
East Los Angeles Insulation Co serves Burbank and the surrounding San Fernando Valley and northeast LA communities. We also work in Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA. If you’re on the edge of Burbank’s city limits, call us and we’ll confirm coverage for your street.
Serving Burbank, CA - Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Burbank
We typically reach most Burbank neighborhoods within one to two business days for a site visit. Our coverage spans ZIP codes 91505, 91506, 91507, and 91508. Call (866) 566-0304 to schedule a time that fits your week.
Most insulation retrofits in Burbank don’t require a permit, but if your HOA or condo association requires documentation of scope or contractor insurance, we provide what’s needed before work starts. Attic work in hillside fire zones may also have specific material requirements, which we’ll flag during the estimate.
Yes. Many of our Burbank customers work in entertainment and need flexible scheduling, including early morning or weekend installs. We’ll schedule around your production calendar and complete the work in one or two visits in most cases.
Call (866) 566-0304 for a free, no-pressure estimate on blown in, attic, or spray foam insulation in Burbank. We’ll measure, explain what your home actually needs, and give you a written quote you can act on now or keep for later.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"He did a blower door test before and after and gave me the numbers. I like being able to see the difference rather than being told about it."
- Gilbert Herrera"Attic was at maybe R-11 from the 1970s and blown in over the top would have just buried the problem. They removed the old material, air sealed the top plates and penetrations first, then blew in to R-49. The upstairs is a completely different house in August."
- Jason Walsh"Handled the utility rebate paperwork, which knocked a real amount off the final cost."
- Rosa Martinez